If a new device is paired after 8 devices have already been paired, the device that was paired earliest is replaced by the new one. The speaker can be paired with up to 8 devices. The speaker is already paired with 8 devices and another device is to be paired.Pairing information has been deleted after repair, etc.Once BLUETOOTH devices are paired, there is no need to pair them again, except in the following cases:.If the pairing mode is released before finishing the process, repeat from step. However, when pairing information is not stored in the speaker, such as at the factory settings, the pairing mode is not released. The pairing mode of the speaker is released after about 5 minutes and the ( BLUETOOTH) indicator flashes slowly.When the speaker of your computer is set to on:.If the speaker of your computer is set to (Mute), sound does not output on the BLUETOOTH speaker. Set the speaker of your computer to on.
#Wireless speakers for mac computer how to#
If you do not know how to turn on the BLUETOOTH adaptor or whether your computer has the built-in BLUETOOTH adaptor, refer to the operating instructions of your computer.
Or, charge the built-in battery sufficiently. Place your computer within 1 m (3 ft) of the speaker.Ĭonnect the speaker to an AC outlet via a USB AC adaptor (commercially available), or connect it to a booted computer.Confirm that the BLUETOOTH wireless technology is installed in your computer.Perform the same procedures to pair to other devices.
It is necessary to pair a device with the speaker to be able to make a BLUETOOTH connection for the first time. Pairing is the process required to mutually register the information on BLUETOOTH devices to be connected wirelessly.
0 kommentar(er)
